Lots of PArts, EB and Other...

[RJLougee]

Folks, I am going to have to move and just do not need to take all of these parts with me.... I would prefer to host a "come get it" type event, I'm thinking Saturday, 26 March, say 0800-1200ish?? More availability as needed?? IDK prices at this point, and pics would clog everything up... For planning purposes, I live in sub-division hell, about 1/2 mile North of the intersection of HWY 24 and Woodmen Rd., in Falcon, 80831.

ONLY A PARTIAL LIST. STILL ORGANIZING>>>
General Fab/Swap
Kingpin D60 inner C, set
Ford kingpin D60knuckle, set
Chevy D60 kingpin knuckle, set
Ford D60 balljoint knuckle inner/outer, set
Chevy D60 spindles, set
Chevy D60 5x5.5 hub/rotor, set
Roller 351W
99 Explorer 5.0 (builder, GT-40P heads)
300 inline 6 cylinder, EFI, wiring/EEC
3.8 SC, wiring/EEC
97 Ford 460, wiring/EEC, extra parts
Builder '89 EFI 460...
BBF C-6, core
Ford D50 BJ housing
Ford D60 BJ housing
8 lug D44 knuckles/spindles/hub/rotor
NP-205, from '78 F150
4ea 14" ORI STX struts, I suggest rebuilding.
Inner/outer D44 C/Knuckles ('78 F250)

Bronco Specific
Ford D44 disk swap (knuckle/hub/rotor)
2WD C4.
C-6/D20 adapter kit
D20
Various Shocks
Doors
77 Gas tank, w/sender
roller 31" tires/wheels
EB 9" housing, (ends..?)
3.54 gear drop-out
EB hardtops, (x2?)
Tailgates
Windshield frames
Dashes
Door Inserts
DOM front roll cage pieces
Stock F150 coils
Stock EB coils
Rancho coils
Deaver coils
Driveshafts
Axle shafts
Hard tops...

Other
Adventure Tent, Fullsize/shortbed
99 Ranger Topper
2007 Polaris ATV wheels/tires
83 Bronco topper

[BOBS 2 68S]

I'm interested in a windsheild frame.

[mickphatmac]

Does the '99 exploder motor have the front serpentine setup?
If YES, I'm interested

[RJLougee]

Does the '99 exploder motor have the front serpentine setup?
If YES, I'm interested

It does not; however, I do have at least the brackets for the Explorer front dress. Not sure on A/C unit, Alt or PS pump, too much stuff in the way right now...
Joe

[Kinder]

PM sent

[RJLougee]

Several folks have asked for pics and I'm working through that.

I've created a Google Photo Album, hopefully this works... Not everything is in there yet, I'm taking pics as I get stuff set out/inventoried. Emphasis so far has been on the most asked about parts.

https://photos.app.goo.gl/gJq6AGUxKhexuYSo9

In order:
'99 Ranger steering column and SRS system.
'66 tailgate, front and back. Rusty on bottom, both sides. $150?
67+ tailgate, front and back. Solid, but dented and "rino-lined" interior side. $75?
67+ tailgate, front and back. Rusty on bottom, both sides. $100?
FOA 2.5: remote reservoir 16" travel coilovers. One seal is weak, $450?
ORI struts, 14" travel, I'll include the vise for working on them, $2400. These are @$1K per right now and a long wait...
Front Cage Pieces, I bent, 1.75", .120 wall DOM, pair at $150?
BJ SD D60 parts, BO?
Crane Chevy D60 kingpin knuckles, spindles, inner 'C's, $600?
A bunch of D60 kingpin parts, BO.
Some D60 hubs, BO.
Hardtop A.
Hardtop B.
Hardtop C.
I'm thinking $400ish per top?
HTH, Joe

[BroncoRaider]

Link isn’t working.

[RJLougee]

Link updated, sharing allowed... Please try again.
Joe

[Jesus_man]

Are you getting in trouble with the neighbors or the Mrs.? LOL!

[RJLougee]

Are you getting in trouble with the neighbors or the Mrs.? LOL!

None of the above. We've been in this house to 21 years and we just don't need a 4500 square foot house any more. And I have accumulated a bunch of parts over that span...

Anyone looking for a six bedroom house, with a 24x30 shop, on a half-acre lot?
Joe

[RJLougee]

For those who plan to come down, my addy is: 7863 Buschborn Rd., 80831. Let me know if you plan to come down. My cell# is 719.six, six, oh, 8093 if anyone needs it.
Joe

[Jesus_man]

Are you getting in trouble with the neighbors or the Mrs.? LOL!

None of the above. We've been in this house to 21 years and we just don't need a 4500 square foot house any more. And I have accumulated a bunch of parts over that span...

Anyone looking for a six bedroom house, with a 24x30 shop, on a half-acre lot?
Joe

Can you move said house to Spokane?

[RJLougee]

Pics updated, added parts:

Good 460, has aftermarket cam in it, 262H if I remember correctly, $550.
Builder 99 Explorer 5.0, GT-40P heads, $150.
95 roller 351W, $450.
EFI 4.9/300 inline 6 cylinder, $400? I have EEC/wiring for this as well.
Builder $460, $200? Lots of extra parts...
Deaver H57C coil springs, these are 4" lift for F150/OJ Bronco, probably 5" in an EB with winch/bumper, $75?
Explorer front accy brackets, BO.
Two sets of heads, both for SBF, $75/set?
A shelf of driveshafts, $25/per, you pick?
A shelf of axle shafts, if you need something specific, let me know, IDK what stock lengths are any more... Most are 5760, not 5260 U-Joints. BO.
A bunch of coil springs, 2x F150/Bronco stock (@1.5" EB lift), 2x stock EB, old school Ranchos, I believe one used set of BCB 3.5", rear Montero/Land Rover, rear Aerostar. BO.