|
It is currently Mon Nov 25, 2024 4:35 pm |
|
All times are UTC - 7 hours [ DST ] |
|
Page 1 of 1 |
[ 4 posts ] |
| Previous topic | Next topic |
Raptor liner ??
| Author | Message |
|---|---|
|
Official CCB Member  Joined: Thu Nov 11, 2010 10:31 am Posts: 770 
|
 Raptor liner ??So I am getting ready to do my interior and want to do raptor liner inside. My question is how big of a compressor do I need? Was thinking of using the one at work but I wouldn’t be able to drive it home. What did you all use?
_________________ 71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift |
| Sun Nov 04, 2018 1:50 pm |
|
|
|
|
Official CCB Member  Joined: Thu Oct 22, 2015 11:47 am Posts: 531 Location: Stapleton
|
Re: Raptor liner ?? Some guys on Cb.com recommend one that can maintain 50 psi and is at least 20 gal.
_________________ “Buddy” - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint... |
| Sun Nov 04, 2018 10:43 pm |
|
|
|
|
Official CCB Member Joined: Sat Oct 02, 2010 9:41 pm Posts: 1201 Location: Erie
|
Re: Raptor liner ?? Do you know what tip is recommended for Raptor? My 20 gallon can do ~8 scfm at 40psi which works well for paint and primer. For primer, the 1.8 tip worked well but I doubt I could use a 2.0 without increasing my scfm. Also, I can only do a panel or two without having to stop to let the compressor catch back up. I also have 20' of pipe to help cool the air before it gets to the gun.
Not sure if that helps but it's what I've learned. Sent from my Pixel 2 using Tapatalk _________________ 1975 Ranger Edition that I've had longer than I've been without it. |
| Mon Nov 05, 2018 8:06 am |
|
|
|
|
Official CCB Member  Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Raptor liner ?? I've used 2 types of guns to spray bedliner. A drywall type hopper gun and a schutz gun. The schutz gun has an adjustable output. The Al's hopper gun says it has 3 tips 6mm, 8mm & 9.5 mm, can't remember which one we used.
https://www.amazon.com/TCP-Global-Pneum ... +spray+gun https://www.amazon.com/Als-Liner-ALS-SG ... schutz+gun I liked the schutz gun because it was much more precise & easy to control, but had to be refilled more often. You wouldn't want to run out of air because the liner will set up if it sits too long. It's a process that is very time sensitive. I did fine with my 5hp 60g single stage compressor with both guns, it's rated at 12.5 cfm @ 40psi. Here is a decent page I found trying to find CFM ratings for schutz guns. https://spray-lining.com/polyurea-and-b ... -settings/ The gun that fits the Raptor cans, 40-60psi @ 5-6cfm: https://www.u-pol.com/us/en/product/rap ... -Jj9tVKj4Y _________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141) |
| Tue Nov 06, 2018 10:06 pm |
|
|
|
|
|
Page 1 of 1 |
[ 4 posts ] |
|
All times are UTC - 7 hours [ DST ] |
Who is online |
Users browsing this forum: No registered users and 48 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |