|
|
It is currently Tue Nov 26, 2024 4:27 am
|
|
Page 1 of 1
|
[ 11 posts ] |
|
Help with BCB EFI Throttle Linkage
| Author |
Message |
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
 Help with BCB EFI Throttle Linkage Initially I just hooked up the throttle cable and realized there was no way the cable was going to get me from idle all the way to WOT. So then, I decided to do Viperwolf's lovely progressive pulley setup and I still can't get the range from idle to WOT. Should I just be reserved to the fact that I can't get to WOT, or is there something I'm doing wrong? Bigger pulley perhaps (I used an 1-1/2")? I'm kind of stuck.
Keep in mind the TB isn't a finished product. I still need to get the helper return spring.
You do not have the required permissions to view the files attached to this post.
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Tue Apr 28, 2015 7:39 am |
|
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm
Posts: 2460
|
Re: Help with BCB EFI Throttle Linkage Is the travel restricted or does it not have enough return spring pressure?
_________________
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
| Tue Apr 28, 2015 8:12 am |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
Re: Help with BCB EFI Throttle Linkage are you able to cut the cable a bit to get WOT and then adjust the pulley for full closed?
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Tue Apr 28, 2015 8:22 am |
|
|
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
Re: Help with BCB EFI Throttle Linkage
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Tue Apr 28, 2015 8:47 am |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: Help with BCB EFI Throttle Linkage Bigger pulley and take the slack out of the cable.
20150424_163741.jpg
IMG_3549.JPG
IMG_3565.JPG
You do not have the required permissions to view the files attached to this post.
|
| Tue Apr 28, 2015 10:21 am |
|
|
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
Re: Help with BCB EFI Throttle Linkage This is basically the pulley I bought.
I'll go try a bigger one tonight. Along with the return spring. That should get the slack out of the cable that's shown. The TB is slightly open in pic because that spring isn't there yet. Didn't know which spring to get when I was at the store last night. After measuring, it should be ~3.5".
I have the adjustment slot cut in the TB arm like you have.
Thanks guys for the input!
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Tue Apr 28, 2015 11:21 am |
|
|
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
Re: Help with BCB EFI Throttle Linkage 2" Pulley seemed to nearly do the trick. It gets to about 85-90% of WOT. I think this will at least get me going.
You do not have the required permissions to view the files attached to this post.
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Wed Apr 29, 2015 9:48 am |
|
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm
Posts: 2460
|
Re: Help with BCB EFI Throttle Linkage Did you cut any part of the cable? I had to cut at least an inch off mine.
_________________
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
| Wed Apr 29, 2015 10:45 am |
|
|
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
Re: Help with BCB EFI Throttle Linkage
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Wed Apr 29, 2015 11:56 am |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: Help with BCB EFI Throttle Linkage
|
| Wed Apr 29, 2015 12:52 pm |
|
|
|
TOOLMAN
Official CCB Member
Joined: Mon Feb 14, 2011 10:29 am
Posts: 768
Location: The MHC
|
Re: Help with BCB EFI Throttle Linkage
_________________
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
|
| Wed Apr 29, 2015 1:11 pm |
|
|
|
|
|
Page 1 of 1
|
[ 11 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 32 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
