|
It is currently Mon Nov 25, 2024 4:43 pm
|
Author |
Message |
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Have to sell it......
Hey Guys, Have not been on here lately, been traveling a lot due to work. I will get to the point, I am selling my Bronco due to some health reasons, and family reasons. I have had migraines everyday, from the time I wake up till the time I go to bed, for nearly 16 months now, and it is just getting worse. I have been to numerous doctors, even had sinus surgery because one doctor said I had a sinus infection and that was the cause. After seeing two chiropractors, physical therapists, Otolaryngologist, and a neurologist, nothing has relieved the pain. There is one thing that does help and that is not sitting down. Moving around I can tolerate the pain more, I have no idea why, but for some reason it helps. Unfortunately, I have a job the requires me to sit behind a desk all day long. It is a great job that supports my family, but it really is not me. I have always worked with my hands. Since these migraines never go away unless I am up and moving, I have decided to find another job that will allow more time on my feet and provide me some sanity. It sucks coming home to your loved ones feeling like you have been run over by a mac truck. So, in order to do this, I have to sell the Bronco to pay off some bills and help move....again. It sucks, but I see no way around it. I can always build another, and will! I threw a quick add on CL today, no pictures and a lame description. The body has no rust, but it is not perfect. Window frame on both sides have broke near the windshield. Everything else has either been replaced or rebuilt. I am curious what price is reasonable. I put $15k because I have seen ones not near as nice between $10-13k. Dont worry, I have thick skin, so be honest and let me know what you think I should ask. I will post pictures of everything when I get a chance.. 1966 Bronco - Rebuilt Ford 302 with an RV cam, less than 20k miles on it. - New PAINLESS wiring harness - MSD ignition, coil, and distributor - 4 barrel Edelbrock Carb and intake - Long Tube Ceramic Headers - New fuel tank, fuel pump - New Fuel lines - T-19 rebuilt (less than 1,000 miles) - D20 rebuilt (less than 1,000 miles) - Wild Horses twin sticks - New front and rear drivelines - Power Brakes, Disc up front - D44 with 3.5 gears, new diff bearings, wheel bearings, and calipers. - Warn Locking Hubs - Big bearing 9" with 3.5 gears, new wheel bearings - New brake lines and emergency brake cables - 3.5" suspension - 2" inch Body - 35 X 12.50 BFG All Terrains - Rock Sliders installed - Custom Bumpers front and rear (winch ready) - Complete heavy duty steering linkage (Heim Joints) - James Duff Steering Stabilizer - WH custom steering shaft (not installed) - replaced the floor pans and bed with new panels - Hard top in great condition. New seals and paint. - New heater core and resealed box - Explorer wipers - Ranger Bucket seats - Differential breathers - Frame had no wrecks or rust, it is in great shape. - Rolling chassis was prepped and then painted with Chassis Saver. - Interior has had a professionally sprayed in bed liner. - Bronco Painted about 7 years ago. Not a show paint job. The bad: Window frames need to be re-welded, but they operate as is. Waterpump has a small leak. Center console does not stay shut. Currently using a bungee cord to keep it shut. I would put a carb spacer on it. Easily drive 75mph with one hand. I have a warning ticket to prove it. Drives straight. This has been my daily driver. Selling it due to health and family reasons.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Mon Feb 03, 2014 12:53 pm |
|
|
Peter Werlin
Official CCB Member
Joined: Wed Sep 18, 2013 10:52 pm Posts: 101
|
Re: Have to sell it......
I'm very sorry about your headaches. Very frustrating to have chronic headaches. Good luck to you and I bet you get 15 k for your 66. Peter
|
Mon Feb 03, 2014 10:07 pm |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: Have to sell it......
Sorry to hear this, good luck with the sale!
|
Mon Feb 03, 2014 10:09 pm |
|
|
hockeydad4-22
Official CCB Member
Joined: Tue Nov 02, 2010 1:11 pm Posts: 2378 Location: Highlands Ranch Colorado
|
Re: Have to sell it......
Post her on cb.com. I would start out asking 18k and negotiate down from there. I agree 15k is a good deal
I really hope you find solution for the headaches
Greg
_________________ [color=#BFFF40]Greg
If you are the smartest person in the room - You are in the wrong room
|
Mon Feb 03, 2014 10:20 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Have to sell it......
So sorry to hear this! My wife gets them as well, and she is quite miserable! But I can't imagine that on a daily basis.
I wish there were a way around this for you, but you do have a very nice bronco and I don't think you'll have a hard time selling it.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Tue Feb 04, 2014 3:34 am |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
Thanks guys! I appreciate all your comments. I will give CB a try, and bump up the price so there is more wiggle room. It is so hard to put a price tag on something like this. I drove her this morning, it is going to be tough saying goodbye...
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Tue Feb 04, 2014 9:39 am |
|
|
Moab Mike
Official CCB Member
Joined: Mon Jan 03, 2011 2:59 pm Posts: 1940 Location: Witness Protection Program
|
Re: Have to sell it......
I've sold 5 of them and regretted each sale.
|
Tue Feb 04, 2014 10:05 am |
|
|
Rox Crusher
Official CCB Member
Joined: Sun Oct 10, 2010 5:36 pm Posts: 3980 Location: Roxborough Park, Colorado
|
Re: Have to sell it......
_________________ 1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
|
Tue Feb 04, 2014 11:21 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Have to sell it......
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Tue Feb 04, 2014 6:02 pm |
|
|
ak68
Official CCB Member
Joined: Sat Jan 19, 2013 7:38 pm Posts: 51 Location: Grand Junction, Colorado
|
Re: Have to sell it......
They are advertising a procedure here in GJ that is like what they do to unclog arteries. They use an inflatable balloon and insert it into your sinuses. This permanently moves tissue and relieves allergies. snoring and possibly headaches. Might be worth researching if you haven't already. I hope you find a way to get rid of the headaches.
_________________ 2000 Land Rover Discovery 2, locking center differential, 5-speed, sliders, diesel conversion, suspension lift
|
Tue Feb 04, 2014 10:20 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Wed Feb 05, 2014 3:36 pm |
|
|
sbolt19
Official CCB Member
Joined: Wed Oct 06, 2010 10:04 am Posts: 740 Images: 0
|
Re: Have to sell it......
Have you sold it yet? I was talking with my roofing sub yesterday and he wants one, offered to buy mine last night while we were talking. And where are you at?
|
Fri Feb 07, 2014 3:28 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
Yea, I still have it. I live in Arvada. Not sure if mine is as nice as yours though
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Fri Feb 07, 2014 3:32 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
Green sold last Saturday. So sad to see her go. I believe the new owner will be able to take care of her better than I could though. I took this picture the day before I let her go.
You do not have the required permissions to view the files attached to this post.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Wed Feb 19, 2014 10:09 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Have to sell it......
That is hard. I hope you get to put a pony in your stable again!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Wed Feb 19, 2014 10:11 am |
|
|
sbolt19
Official CCB Member
Joined: Wed Oct 06, 2010 10:04 am Posts: 740 Images: 0
|
Re: Have to sell it......
Did it got to a guy down here in the Springs or someone up in your neck of the woods? I gave all the info to my roofer and wondered if he got in touch with you.
|
Wed Feb 19, 2014 4:28 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Wed Feb 19, 2014 4:39 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Wed Feb 19, 2014 4:41 pm |
|
|
mickphatmac
Official CCB Member
Joined: Fri Mar 16, 2012 10:26 am Posts: 1810 Images: 14 Location: Evans,CO
|
Re: Have to sell it......
I saw your Beautiful Emerald on Toms Broncos classifieds... I guess that explains the "kinda weird story!" http://www.classifiedads.com/classic_ca ... 384629.htm
_________________ 1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
|
Sun Mar 09, 2014 10:29 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sun Mar 09, 2014 11:02 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
It is not worth $22,500! He just put lipstick on it to make it look better. I wish I could warn anyone interested in buying this. The back of it has bondo all over it! The seats are crap. The turn signals do not work. I hope he does not rip someone off.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sun Mar 09, 2014 11:08 pm |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
Seriously, we need to get the word out that this is not worth that.
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Sun Mar 09, 2014 11:13 pm |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Have to sell it......
The site has a flagging option.
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Sun Mar 09, 2014 11:19 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Have to sell it......
We should all contact him and say, it's only worth about....uhhh... 13k!
And I agree, that seems like a reasonable price. But it is worth whatever anyone is willing to spend... If you don't do your research, then you deserve to get screwed! I know I've done that a time or two. Impulse buys suck!
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Mar 10, 2014 4:26 am |
|
|
hockeydad4-22
Official CCB Member
Joined: Tue Nov 02, 2010 1:11 pm Posts: 2378 Location: Highlands Ranch Colorado
|
Re: Have to sell it......
Same thing happened when I sold my 51 ford F1 pick up.
Guy and his partner came and looked at it but didn't have time to drive her. Offered me a fair price claiming to be developers who liked old cars and trucks. They used that excuse to buy them and park them with signs on their projects from time to time as marketing tools. I told him it was cash only, he showed up at work the next day with cash, two- one gallon zip lock bags worth.
Two days later a friend sends me a link similar to this one, guy has her on eBay asking double what I had her listed at. I had her on eBay before selling locally and through 2 cycles the most interest I ever got was 7.5k. Not nearly enough to sell.
I suppose everyone has got to make a buck but it sure feels slimy the way they go about it, doesn't it?
_________________ [color=#BFFF40]Greg
If you are the smartest person in the room - You are in the wrong room
|
Mon Mar 10, 2014 4:53 am |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Mon Mar 10, 2014 9:41 am |
|
|
Geologist
Official CCB Member
Joined: Wed Jul 24, 2013 11:05 am Posts: 175
|
Re: Have to sell it......
I tried flagging it, and the link does not work anymore?
_________________ 1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
|
Mon Mar 10, 2014 9:44 am |
|
|
Peter Werlin
Official CCB Member
Joined: Wed Sep 18, 2013 10:52 pm Posts: 101
|
Re: Have to sell it......
Geo, you did the right thing!
|
Mon Mar 10, 2014 11:13 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Have to sell it......
Saw your post about sleeping well at night, and was thinking the same.
Sent from my C771 using Tapatalk 2
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Mon Mar 10, 2014 11:44 am |
|
|
Error404
Official CCB Member
Joined: Fri Aug 16, 2013 8:33 am Posts: 92 Location: COLORADO SPRINGS
|
Re: Have to sell it......
Sadly the same thing happened to me.. I sold my 71 for 4700 guy has it re listed for 13k I've found it here and on classicbroncos even desertrangers site.. since he picked it up from me he laid it on its side and still trying to get 13... its still listed here its the black one with the orange stripe and chrome grill.. no where near worth that..
_________________ 1996 bronco 4bt sas . 1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
|
Thu Mar 13, 2014 1:40 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 16 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|