|
It is currently Wed Nov 27, 2024 1:30 am
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Author |
Message |
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Fire extinguisher info
I was reading on a hot rod site about fire extinguishers. There is a lot of good info here. What I learned and wanted to share is that the powder in common ABC fire extinguishers packs together and turns into a solid lump. This is worse in extinguishers in cars due to the vibrations. So you should turn your fire extinguisher upside down and thump on it with a rubber mallet every few months. I checked mine out and they are all packed solid. http://www.jalopyjournal.com/forum/show ... p?t=639764
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Apr 26, 2013 10:52 am |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: Fire extinguisher info
So not getting around to mounting mine and letting it roll around under the passenger's seat was actually a safety measure?
|
Fri Apr 26, 2013 11:26 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Fire extinguisher info
lol. Probably turns out to be good preventative maintenance. Until it accidentally goes off.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Fri Apr 26, 2013 2:26 pm |
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am Posts: 6198 Images: 0 Location: Lakewood
|
Re: Fire extinguisher info
Details.
|
Fri Apr 26, 2013 2:27 pm |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fire extinguisher info
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Mon Apr 29, 2013 7:27 am |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Fire extinguisher info
I was working in a sheet metal plant at one time and on every fork lift there was a fire extinguisher. Well the guy at the time was a complete idiot. He had backed into a rack of material and knocked the extinguisher off and it exploded once it hit the floor. Made a huge mess and was hard to breathe in the plant. Sweeping up the powder was the difficult part trying to breathe. This same guy went on and rammed the forklift into a natural gas line and broke it then drove off and didnt tell anyone.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Mon Apr 29, 2013 8:00 am |
|
|
hockeydad4-22
Official CCB Member
Joined: Tue Nov 02, 2010 1:11 pm Posts: 2378 Location: Highlands Ranch Colorado
|
Re: Fire extinguisher info
That pink Cuda I had posted pictures of here previously. Well by buddy had never started it, one day decides to do so. Puts the charger on the battery, cranks and cranks... no go. So he pours some gas down the carb to prime it, still no fire. Next he sprays starting fluid in - now he has a big ole fire. Well his son - 16 yrs old is quick on his feet and grabs the extinguisher and extinguishes that fire... no there was not an air cleaner installed.
Yes, I did go over and pull the carb, blow all the ports, jets and other assorted orifices out vacumed the intake and called it good.
Then I adjusted the timing. Mucho varoom varoom then!
_________________ [color=#BFFF40]Greg
If you are the smartest person in the room - You are in the wrong room
|
Mon Apr 29, 2013 11:08 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Fire extinguisher info
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Mon Apr 29, 2013 11:40 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fire extinguisher info
I'll bet mine is kiddo.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Tue Apr 30, 2013 12:50 am |
|
|
kbank6
Official CCB Member
Joined: Sun Apr 14, 2013 5:00 pm Posts: 306 Location: Greeley, CO
|
Re: Fire extinguisher info
I know from my time in the Navy and dealing with the extinquishing agents we used a lot of Halon in the engine rooms. When the cord was pulled the warning light would come on and you had short period of time forfore the agent would release.
_________________ 73 Ranger (Holy Crap, replacing the door post is so much fun!)
|
Wed May 01, 2013 9:49 pm |
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 63 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|