|
|
Register •
FAQ
• Login
|
|
|
It is currently Mon Nov 25, 2024 8:27 pm
|
|
Page 1 of 1
|
[ 7 posts ] |
|
96 Explorer TIming Cover Removal
| Author |
Message |
|
Strike2
Joined: Mon Nov 28, 2016 11:34 am
Posts: 808
|
 96 Explorer TIming Cover Removal So the last part of my 96 donor I need to remove is the timing chain cover, I believe these are the 2 bolts that Eck warned my about that always seem to break. My plan for sat is to weld a nut to the stud (never tried this before) heat the block up and try and remove
Has anyone else had happen? and if so how did you remove it.
It seem that the cover should just pop off but I've tried using a rubber mallet I just don't want to ruin this last part.
You do not have the required permissions to view the files attached to this post.
|
| Fri Jan 13, 2017 9:44 am |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
Re: 96 Explorer TIming Cover Removal I would also try to soak them in something like PB Blaster for a day or so. Welding the nut might work but. Would work better after soaking.
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Fri Jan 13, 2017 12:36 pm |
|
|
|
phyler
Official CCB Member
Joined: Sat Oct 02, 2010 9:41 pm
Posts: 1201
Location: Erie
|
Re: 96 Explorer TIming Cover Removal I have the same issue right now. Only need to get the timing cover off so I can sell the 5.0 block. I got one off using the weld a nut trick. It didn't work for the other side (yet).
Sent from my HTC One using Tapatalk
_________________
1975 Ranger Edition that I've had longer than I've been without it.
|
| Fri Jan 13, 2017 1:17 pm |
|
|
|
Viperwolf1
Official CCB Member
Joined: Tue May 07, 2013 10:37 pm
Posts: 1485
|
Re: 96 Explorer TIming Cover Removal The covers are available new if you don't want to spend much time on the old ones.
|
| Fri Jan 13, 2017 2:59 pm |
|
|
|
Strike2
Joined: Mon Nov 28, 2016 11:34 am
Posts: 808
|
Re: 96 Explorer TIming Cover Removal
|
| Fri Jan 13, 2017 8:28 pm |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: 96 Explorer TIming Cover Removal Mine broke the cover. Had to just buy a new cover and not deal with it. When you reinstall use lots of anti seize on all the bolts.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sat Jan 14, 2017 7:57 am |
|
|
|
Strike2
Joined: Mon Nov 28, 2016 11:34 am
Posts: 808
|
Re: 96 Explorer TIming Cover Removal [quote="ZOSO"When you reinstall use lots of anti seize on all the bolts.[/quote]
X2 on the anti seize , welding the nuts on to snap the bolts again. So just because I'm stuburn headed I cut into the block 1/16" behind the cover and then it popped right off.
Both bolts were still complety seized that I needed to put it in a vise to press them out working them back and forth.
Note to self " Never volunteer to change a explorer timing chain!!!
|
| Sat Jan 14, 2017 8:36 pm |
|
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 60 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
