Thanks again fellas. Going to try to finish this up this weekend. I'm going to try to utilize some anti-seize on the sleeves/bolts in case I need to pull this apart in the near future. Anyone think that would be a bad idea?
| www.ColoradoClassicBroncos.com http://coloradoclassicbroncos.com./ |
|
| Blue Wrench http://coloradoclassicbroncos.com./viewtopic.php?f=4&t=9820 |
Page 1 of 1 |
| Author: | TOOLMAN [ Wed Oct 03, 2018 9:07 am ] |
| Post subject: | Blue Wrench |
I'm replacing the rear springs and having trouble getting the bolts removed from the spring hangers. I suspect the bushing sleeves are rusted to the bolts and I think they'll probably need to get cut out. Does anyone have a portable blue wrench or any better ideas for getting these out? One of the four bolts are free and even a 15 lb. sledge wouldn't touch them. |
|
| Author: | B.O.B. [ Wed Oct 03, 2018 3:14 pm ] |
| Post subject: | Re: Blue Wrench |
I used a sawzall to get mine out |
|
| Author: | TOOLMAN [ Thu Oct 04, 2018 7:10 am ] |
| Post subject: | Re: Blue Wrench |
Oooo, good call Bob. Didn't even think about a sawzall. That's why I posted! |
|
| Author: | ZOSO [ Thu Oct 04, 2018 7:15 am ] |
| Post subject: | Re: Blue Wrench |
Buy a good sawsall blade and go to it. I had to do the same on my 79. Ended up buying a diamond carbide blade to get those bolts cut. |
|
| Author: | TOOLMAN [ Fri Oct 05, 2018 2:06 pm ] |
| Post subject: | Re: Blue Wrench |
Thanks again fellas. Going to try to finish this up this weekend. I'm going to try to utilize some anti-seize on the sleeves/bolts in case I need to pull this apart in the near future. Anyone think that would be a bad idea?
|
|
| Author: | ZOSO [ Fri Oct 05, 2018 4:13 pm ] |
| Post subject: | Re: Blue Wrench |
I antiseize everything. |
|
| Page 1 of 1 | All times are UTC - 7 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|