|
It is currently Mon Nov 25, 2024 3:58 pm
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Author |
Message |
BOBS 2 68S
Official CCB Member
Joined: Sun Aug 04, 2013 2:19 pm Posts: 375 Location: Hudson
|
Fuel pump
So this morning on my way to work the bronco died. Acted like no fuel but gas in both tanks. Had wife tow me home, took the day off from work. Got ti in the shop and the shop warmed up. After looking at all the usual suspects ignition, fuel filters. I filled the carb and it ran so pulled the fuel pump and found this.The arm was easy, the spring took some work with a mirror and magnet to get out. The broken pump is a Holley and is 5 or 6 years old. The where the pivot shaft is mounted the housing broke. Any one ever had this happen?
You do not have the required permissions to view the files attached to this post.
|
Wed Apr 10, 2019 6:58 pm |
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm Posts: 3906 Location: Henderson, Co
|
Re: Fuel pump
I had the same style pump on my 79. The arm didn't break but it would not pump during cranking. And barely pump at idle. Had to have more rpm(found this out on spring creek) Ditched it for an electric pump.
That is interesting tho. I'd call Holley just cause even though there is no warranty.
_________________ Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
Thu Apr 11, 2019 7:31 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Fuel pump
I'd also switch to an electric pump.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Fri Apr 12, 2019 10:26 am |
|
|
BOBS 2 68S
Official CCB Member
Joined: Sun Aug 04, 2013 2:19 pm Posts: 375 Location: Hudson
|
Re: Fuel pump
Thinking hard on going electric. The big reason for me is the part store fuel pump are soft thin metal and do not last. That is why I went with the Holley and it was rebuild able.
|
Sat Apr 13, 2019 6:06 am |
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm Posts: 4074 Location: Gardnerville, NV
|
Re: Fuel pump
Before EFI, I had an Edelbrock mechanical fuel pump. It looks suspiciously like the Holly. I had one last for quite a few years before dropping to like 1psi, the next didn't last more than 1 year. They both caused problems a long way from home. So I'd really consider something more reliable.
I will need a new fuel pump in my 72 when its time to get it going. I was planning on keeping it stock, but it sounds like the reman'd parts store fuel pumps suck? Not surprised really. Guess I need to consider an electric pump.
_________________ "America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe 74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges 72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
Sat Apr 13, 2019 11:20 am |
|
|
BOBS 2 68S
Official CCB Member
Joined: Sun Aug 04, 2013 2:19 pm Posts: 375 Location: Hudson
|
Re: Fuel pump
Any one know if Ford still makes mechanical fuel pumps? I might stop by Ford and ask.
|
Sat Apr 13, 2019 4:02 pm |
|
|
BOBS 2 68S
Official CCB Member
Joined: Sun Aug 04, 2013 2:19 pm Posts: 375 Location: Hudson
|
Re: Fuel pump
I know this has been beet to death. But what is the most preferred electric fuel pump for use with a carb.
|
Tue Apr 16, 2019 4:02 am |
|
|
BroncoCrawler
Official CCB Member
Joined: Sun Jul 14, 2013 9:21 am Posts: 90 Location: Wheat Ridge, CO
|
Re: Fuel pump
I have been running a Holley red electric for years with no issues ever. I also ran a red electric on my old IdI diesel Ford as a lift pump for years with no issues.
Sent from my Pixel 3 XL using Tapatalk
|
Tue Apr 16, 2019 6:51 am |
|
|
cpldavis37
Official CCB Member
Joined: Sun Oct 16, 2011 7:45 pm Posts: 357 Location: Thornton, Co
|
Re: Fuel pump
I used a Holley that flowed 100ish gph (Dont remember exactly). It was really loud, but it worked well. I also carried a cheap one from Autozone as a trail spare.
_________________ TJ "Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known." F. Scott Fitzgerald 1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
|
Tue Apr 16, 2019 6:52 am |
|
|
Eck
Official CCB Member
Joined: Thu Oct 25, 2012 9:33 pm Posts: 2460
|
Re: Fuel pump
I think the two most commonly used ones in the Bronco community are the Holly Red and the Carter P4070. I had the Carter on my truck when I had a carb and now run it as my LP pump to HP with EFI.
_________________ 69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
|
Tue Apr 16, 2019 8:18 am |
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 104 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|