|
It is currently Mon Nov 25, 2024 5:38 pm
|
|
Page 1 of 1
|
[ 22 posts ] |
|
Seriously toying with an idea: Cummins or Powerstroke
Author |
Message |
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Seriously toying with an idea: Cummins or Powerstroke
No, it's not for the Bronco.
I've been hung up on the idea of a 3/4 ton or better for awhile now. Back when I bought my Tacoma, new F250s were 10k off of sticker, but I still couldn't stomach 45k for a truck. Looking at resale for my Taco, with only 18k miles, versus the average of 40K+ I have seen on dealer and private party ads I have seen lately, I am pretty sure I could net around 25k trade-in or private party sale price.
That being said, I'm on the verge of going in to the market for a used 3/4 ton or 1 ton truck. Right now I'm torn between a Cummins powered Dodge or a Powerstroke from Ford.
I don't expect to do a serious amount of towing with the truck, but I would like to be able to move Broncos about. I plan to pick up an 18' dovetail as well, if I get the truck. Also, in the event I have to move out of state for work (which there are no plans at the moment, but it is always a possibility), I'd like to be able to trailer the Bronco and the wife's 4runner, which would necessitate an upgrade to probably a 5th wheel trailer.
Dan, I know I read you owned a Cummins powered Dodge before. What did you like or not like about it?
Any other Cummins owners out there? I'd like to hear from the Powerstroke owners too. 6.0, 6.4, and 7.3 if we have them.
I'm leaning more towards the Powerstroke right now because it is Ford. But I also know the Cummins is a damn good motor too. I have issues with the interior quality in Dodges. I've ridden in several and things just feel cheap inside compared to a Ford. But I don't really need the space shuttle control center manufacturers seem to be building nowadays.
So, hit me up with your opinions.
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Wed Dec 15, 2010 6:13 pm |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
A 7.3 is easily accessible IMO based on the fact that '04 was the last year. '04's are selling at a pretty good price. If I decided to go with the 7.3 and an '04 or earlier truck, I'd likely go private party with both the Taco and the new purchase, simply because I don't know how a trade-in would go when the vehicle you are trading holds more value than the one being purchased. I don't like walking in to situations like that, so I'd have to get smart quick.
I did drive a 6.0 sitting on 37s during my last trip to the sandbox. Fun truck to drive and turned a lot of heads in an area where you only see Humvees. Was pretty fun to smoke the tires in front of a bunch of GIs sweating under a canopy waiting for a shuttle bus. Big cheers all around.
I really like the look of the later 250s, with the flatter noses on them. But I've also heard better things about 7.3s than 6.0s. 6.4s are a little daunting for me at this point seeing as they are fairly new to the market and bugs are probably still being worked out.
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Wed Dec 15, 2010 7:31 pm |
|
|
777mechanic
Official CCB Member
Joined: Sat Oct 23, 2010 9:00 pm Posts: 252
|
Re: Seriously toying with an idea: Cummins or Powerstroke
i've owned 4 powerstrokes , 2 excursion a f350 and a f250 . the difference in ride between the 350 and 250 are zero , the 3 7.3 i've owned have been flawless got over 125k and never touched them , that being said the 6.0 in my 03 was a pos spent more time in the dealer the out . but in 04 they changed the hp pump and fixed some head problems . i would not touch a 6.0 that someone has modded other than oil filter bypass , the motor aready runs like a rapped ape . now my current excursion is modded in every way i could short of putting in bigger injectors . if your going saturday to breakfast i'll see you there and we can talk more .
|
Wed Dec 15, 2010 8:24 pm |
|
|
Entourage
Official CCB Member
Joined: Wed Sep 29, 2010 5:45 pm Posts: 3275 Location: Gilbert, Arizona
|
Re: Seriously toying with an idea: Cummins or Powerstroke
I don't think you can go wrong with either truck. Personally, I would put a GMC or Chevy with a DuraMax/Allison at the top of the list. I am on my 4th GMC (all non-diesel) and love them. I come from a GM family and my Ford Bronco may be my only Ford. Sorry to throw more opinions at you.
It is exciting how your Toyota has kept its value - they are great trucks and yours is great looking aside from the need for a car wash :)
_________________ "I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
|
Wed Dec 15, 2010 8:38 pm |
|
|
777mechanic
Official CCB Member
Joined: Sat Oct 23, 2010 9:00 pm Posts: 252
|
Re: Seriously toying with an idea: Cummins or Powerstroke
gmc uses a common rail fuel injection so you can add an extra cp3 fuel pump to those motors , the early 2000 where the best mileage . dodge uses the same and both will make incredible power for little money . my friend races a cumming in a ford truck .
|
Wed Dec 15, 2010 9:38 pm |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 3:28 am |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 3:34 am |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 3:36 am |
|
|
freeheelbillie
Official CCB Member
Joined: Wed Sep 29, 2010 11:23 am Posts: 574 Location: Denver
|
Re: Seriously toying with an idea: Cummins or Powerstroke
I am a Ford man myslef...not to mention Ford is still a private company!
If you're in the market for one and know what you want (new or used) let me know...my family is in the business. Although they are in Michigan the cost to ship is still a savings from time to time.
_________________ A nation of sheep breeds a government of wolves. (0======0)
|
Thu Dec 16, 2010 10:29 am |
|
|
cmcdowell
Official CCB Member
Joined: Fri Oct 29, 2010 7:30 am Posts: 48 Location: Aurora, CO
|
Re: Seriously toying with an idea: Cummins or Powerstroke
Here's my two cents. Cummins is a great engine! But Ford Trucks are amazing! Being a Ford guy, I go with the best overall truck and a powerstroke. I'm not sure if its new to this year or last, but I was sitting next to a new powerstroke at the gas station a while back and I could hardly hear it while it was running! They must have added some kind of turbo dampner to make it quiet. That was my only hangup with the powerstroke, the noise. A new F250 powerstroke with a crewcab and a lift is definitely on my list. By the way, there's a lot of things on my list. Most of which are extremely expensive and highly unlikely. Just ask my wife. Lol.
_________________ Chad (cmcdowell) [color=#FF4000]74' Sport.
|
Thu Dec 16, 2010 10:50 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Seriously toying with an idea: Cummins or Powerstroke
I own a 2002 F-350 PSD and it's been a GREAT truck. I've had some issues here and there, but still a great truck and does what I ask of it. I do wish it were 4-door tho since we've started a little family, but I'll hang on to it as long as I can. I love my 6spd manual tranny and I have had ZERO issues with it. The Auto that came behind the 7.3L is prone to issues, but can be solved with a stop in at BTS and $4000.00 From my experience the 6.0L is a crap-shoot whether you'll get a good one or not. I personally have heard more horror stories than good ones and would avoid ALL 6.0's. My Father-in-law and brother-in-law both of '05's, one modded and one stock. Both have given them a lot of fits. If I were forced to buy a 6.0L, I wouldn't look at anything older than '05. I don't know much about the 6.4L's, but with the emission junk on it, I know they don't do well for MPG's. But you might find one with some factory warranty left on it. I don't know much about Dodge other than the motor is good. I hear people say they love the motor, but hate what's wrapped around it. Being a Ford man, if I were in your shoes, I'd try to find a well kept 7.3L. One warning, once you go diesel and have a good experience, you won't go back! J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Dec 16, 2010 11:30 am |
|
|
Raptoracer24
Official CCB Member
Joined: Tue Oct 26, 2010 6:24 pm Posts: 85 Location: Parker, CO
|
Re: Seriously toying with an idea: Cummins or Powerstroke
We had a 99 Powerstroke that never let us down and always ran strong. 2 years ago we bought an 05 F-250 Harley Edition that has been amazing. It has 110,000 miles and we haven't had a problem (knock on wood). It pulls a 10 or 12,000 pound toyhauler somewhat regularly in the summer and spring without problem. If you do go Powerstroke I'd go with a 6.0. The 7.3s are great motors but he 6.0s are just so much quieter and smoother. I'd also recommend staying away from the 04s because they had a lot of bugs but the 05s and 06s seem to run the best.
|
Thu Dec 16, 2010 11:46 am |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 11:49 am |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
Lots of great advice guys. Keep the ideas coming. I'm surprised there are no 6.4L owners. My old boss picked up a 6.4L F350 dually in '08 and he loves it, but in reality its more commuter truck than tow rig. But he's got more money than he knows what to do with so commuting in that hog is no sweat for him.
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 11:52 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Seriously toying with an idea: Cummins or Powerstroke
What do you mean by running lights?
My truck has Automatic headlights (lariat) and if I leave them on Auto and pull the switch out (for fogs) the fog lights are on as long as the key is on. I don't know if they were intended for daytime running lamps or not, but they work as such.
Then there is that mod so that they stay on with your high beams.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Dec 16, 2010 11:57 am |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
Running lights = those eight or so amber lights on the roof
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 11:58 am |
|
|
Jesus_man
Official CCB Member
Joined: Thu Nov 11, 2010 10:36 am Posts: 5984 Location: California
|
Re: Seriously toying with an idea: Cummins or Powerstroke
Oh, those are clearance lights. Believe that came factory on the 1-tons, but can be added to any truck.
J.D.
_________________ 1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow. http://www.ucora.org
|
Thu Dec 16, 2010 12:15 pm |
|
|
sbolt19
Official CCB Member
Joined: Wed Oct 06, 2010 10:04 am Posts: 740 Images: 0
|
Re: Seriously toying with an idea: Cummins or Powerstroke
|
Thu Dec 16, 2010 12:16 pm |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
Trust me, I'm kicking myself in the pants for checking craigslist an hour too late about a year ago. 1997 F350 crew cab 4x4 with a 12V Cummins in it for like 6000. It went QUICK.
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 12:21 pm |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Thu Dec 16, 2010 2:42 pm |
|
|
cobshane
Official CCB Member
Joined: Sat Nov 13, 2010 12:31 am Posts: 516 Images: 1 Location: littleton
|
Re: Seriously toying with an idea: Cummins or Powerstroke
dont bother with with the newer dodge. the newer engine design has many problems stick with the old on this. I havent seen many of the newer powerstrokes with to many problems. Plus they look mean. don't bother with the duraslack
|
Sun Dec 19, 2010 7:55 pm |
|
|
akaFrankCastle
Official CCB Member
Joined: Wed Oct 27, 2010 6:25 pm Posts: 4901 Images: 0 Location: Colorado Springs
|
Re: Seriously toying with an idea: Cummins or Powerstroke
_________________ Stroppe'd 1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One 1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
|
Mon Dec 27, 2010 11:30 pm |
|
|
|
|
Page 1 of 1
|
[ 22 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 132 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|